A resin bound rubber crumb surface is a blended mix of rubber granules bound together with a single part polyurethane resin, having been mixed on site in a specialist mixer and laid on an existing suitable; or specially prepared bases, to provide a virtually continuous surfacing. It is most commonly installed as a two layer system with the wearing course, always normally being a nominal depth of 15mm, with the ‘shock pad’ base depth being variable to meet with the requirements of any play equipment.
Our resin bound rubber crumb surfacing is tested to comply with BS : EN 1177 : 1998 The wearing course / layer is constructed from a 1-4mm EPDM (Ethylene Propylene Diene Monomer) rubber. Rubber Crumb surfaces are manufactured using recycled tyres and thus are very environmentally friendly.
It is available in a wide variety of colours and patterns and can be applied to almost any area to make a seamless, smooth, and porous surface.
Rubber crumb is the ideal surface product for any area where there is a risk of falling, particularly when used by young children or the elderly.
The finished surface is highly resistant to rust, oil, corrosion, salt or cracking due to changes in temperature.